Helmet is a crucial safety gear we have to wear whenever doing an extreme sport or any sport that may cause a severe head injury if things goes wrong but, the helmet types itself also play a role in keeping you properly protected just like Leatt DBX 3.0 Vs Bell Super 3R that are made for mountain cyclist. They are very much the same in so many sides but to decide which seems to fit you the most, do check what they can offer below.
In this article, we are going to give you information about:
- Which Bike Helmets to Purchase
- What are Leatt DBX 3.0 and Bell Super 3R
- What Leatt DBX 3.0 and Bell Super 3R Look Like
- How are the Safety of Leatt DBX 3.0 and Bell Super 3R
- What Leatt DBX 3.0 and Bell Super 3R can offer
- Are Leatt DBX 3.0 and Bell Super 3R Comfortable
- Leatt DBX 3.0 Vs Bell Super 3R
Bike Helmet
Sport is great, they can make you forget about the constant daily routine and doing them once in a while is amazing for both mind and body as well. The options however, are different based on what you want to do and what seems more interesting to you so it is just normal to have different hobbies. Extreme sport is one of the most entertaining activities we do to make life more interesting but, being exposed to danger doesn’t mean we have to ignore the safety precautions.
Mountain biking itself is one of the most popular extreme sports that almost everyone can access as long as they live close enough to the terrain because it is relatively accessible even from big cities. While it is fun to ride against gravity, the condition in which you are cycling is not the best for comfortable and safety activity which is why safety gear is a must have. Any cyclist understands the importance of a helmet as it is common sense to wear one.
| Leatt DBX 3.0 | Bell Super 3R | |
|---|---|---|
  |   |
|
| Product Dimensions | 16 x 10 x 11 inches | 14 x 10 x 11 inches |
| Shipping Weight | 3.2 Pounds | 1.73 Pounds |
| Best offer | Check price | Check price |
None of us want to end up unconscious and with severe head injury just because the helmet is not comfortable or probably not your style. Road cyclists may have different opinions on how a helmet can save their life but for mountain bikers, it is just a norm to follow these basic precautions. The problem is, which helmet will be your choice as there are tons of them out there and not all will be your best choice, especially for a more challenging ride.
No matter what the discipline is, we agree that the first and foremost important when looking for a helmet is the fit itself. A good helmet has to stay in place whenever used and under load because it is there to protect your head and when they slip as our head hits something, it means the helmet can’t do the job properly. Finding the best fit is very important as small sizes won’t be comfortable and won’t cover your head properly while bigger helmets won’t stay in place.
Just like common safety gears, helmets must meet the standard to be marketed and these standards tell a lot of what the units are suitable for. In Europe EN1078 is the only mandatory standard that covers all bicycle helmets while ASTM F1952 – 15 is the American Standard for those made for DH riding. Depending on where you live, the certification may differ too and there are a host of different testing institutes or notified bodies offering or supporting helmet testing.
About Leatt DBX 3.0 and Bell Super 3R
These two are probably the fastest and most convenient way to shop for a new helmet including for the mountain biking but you may have to dig in deeper into the model that you want to purchase first because not all companies will display all related information in their page and this also what we wished they will start doing as it will save much of your time. Another method is we can just shop from your favorite brands or popular names.
Usually we tend to like certain manufacturers better based on the look or how they feel great in your head and other personal factors but among those amazing names we can recommend, Leatt and Bell are two common options many bikers are going with. They are rivals but one thing for sure, they carry many amazing helmets in the catalog that may attract your attention thanks to how they designed them thoughtfully and fairly competitive prices for every rider to consider.
If you are here then we instantly thought MTB is what you do for fun and for this discipline, Leatt DBX 3.0 and Bell Super 3R are going to be very ideal options for your application. Both of them are the old favorite of many since they have been around for quite some time and if you prefer a newer helmet, we recommend checking the Leatt DBX 3.0 Vs 4.0 here or the Bell Super Air R but before moving further, we want to mention that none of these models are rated for DH racing.
If racing with gravity is what you do then we highly recommend checking the more solid options or any models with non-detachable chinbar. Both Leatt DBX 3.0 and Bell Super 3R are pretty much the same to each other and they are in general while suitable for enduro riding, not the best for the more demanding purpose. In our opinion they are equally great hybrid models which can be transformed based on what type of riding you are doing.
Leatt DBX 3.0 and Bell Super 3R Design
As you can see from the sample picture above, these enduro helmets are very similar or look like just any full face helmets out there but side by side their fashion and the details of their shapes are a bit different. In comparison Leatt may look thinner than your Super 3R as it has huge vents all over the helmets and resulting in more exposed foam as well while the latter is rounder in shape. For the fashion you can get a variety of shades to match the taste.
Being a full face model we can’t say that these two are going to be lightweight because they will definitely be heavier than your road helmets but comparing them to similar shells, they are not obviously heavy too. In medium size the Leatt is about 760 grams while detaching the chin bar will reduce the weight at around 403 grams. In comparison, your Bell is also 760 grams in full face mode while the main shell itself is at 440 grams.
Leatt DBX 3.0 and Bell Super 3R Safety
The reason why none of Leatt DBX 3.0 and Bell Super 3R are ideal for DH racing or more extreme application is because they don’t carry the ASTM certification which is necessary if you will be shopping for this certain discipline so in general we can say that they are more ideal for regular mountain biking. The construction also remains the same as the common bike helmets with polycarbonate shell for the outer protection and EPS foam on the inside.
What’s different is when you check the inside of these helmets because in DBX 3.0 you will find a set of blue turbines inside, spreading across the inner lining. Usually we found MIPS just like what exists in Super 3R but Leatt uses these small turbines to provide the same protection and these small spots will add a little bit of cushioning as well as allow the helmet to shift a bit when facing an impact while keeping the inner layer in its place.
Leatt DBX 3.0 and Bell Super 3R Feature
What makes Leatt DBX 3.0 and Bell Super 3R identical is actually the feature that allows them to be transformed into a half shell helmet which makes the weight much lighter as well. This mountain bike style is great as it means we can have two helmets when buying just one and depending on what type of terrain or which do you think will fit in the activity the most, we can alter their mode conveniently by snapping the chin bar lock.
What’s different is how to attach and detach the chin bar to the main helmet because this is a bit different on both models with Super 3R using three clutch systems instead of two so in comparison you can attach and detach DBX 3.0 faster as there is less clutch to fiddle with.
Leatt DBX 3.0 and Bell Super 3R Comfort
On the comfort part they are also the same with tons of vents all around the helmet to make sure there will be more wind getting into and through your helmet. They are very comfortable in half-face mode but a bit heavier in the fell-face mode yet, in comparison we do think they will suit most terrains as well. The adjustable visor is good too to provide the best position but in half mode the Super 3R feels heavier than Leatt.
Leatt DBX 3.0 Vs Bell Super 3R
These popular enduro helmets are convenient but versatile options for mountain bikers out there who want to get the best experience including proper protection. The prominent difference besides how DBX 3.0 is much lighter in half face mode, is the fact that it has a different additional safety system with small turbines across the inner layer of the helmet to provide slight movement and even extra padding for best comfort. Additionally, the chinbar is faster to attach and detach from the main helmet.
Conclusion
All in all, these two are good options to consider but if we have to choose between the two then Leatt DBX 3.0 is a better option based on how light the helmet is in half face mode and the ease of application when you need to transform their shape.
