Bell Stratus Vs Z20

Cycling is typically safe activity depending on where we ride the bike and how we prepare by wearing safety gear like a helmet. Helmet is necessary both for road and mountain cyclists as they can protect our head while the options itself is abundantly available out there such as the Bell Stratus Vs Z20 road bike helmets. Despite the fairly affordable price these models are very comfortable to ride with yet, do check which the best option will be right in this article.

In this article, we are going to give you information about:

  • Which Bike Helmets to Choose
  • What are Bell Stratus and Z20
  • What Bell Stratus and Z20 Look Like
  • How are the Construction of Bell Stratus and Z20
  • How are the Fitting System of Bell Stratus and Z20
  • Are Bell Stratus and Z20 Comfortable
  • Bell Stratus Vs Z20

Bike Helmets

Finding a fun hobby is not an instant thing that we can always notice in the first try, sometimes we have to try various different new stuffs to find what meets our personal taste the most. Cycling is a very active hobby that everyone can get into and especially in the middle of a pandemic where people may get worried to visit a gym, so they can still get the amount of exercise by cycling around their living area or try some adventure on different terrains out there.

No matter where you cycle, as long as we are moving with a real vehicle out there, the chance of slipping off the bike is always present and when meeting such an unfortunate event, it is best to always wear a safety gear or a helmet. A helmet will not prevent injury by one hundred percent but they will reduce the risk of more severe injury that may happen if the head is not protected properly when it receives an impact.

Bell Stratus Bell Z20
Product Dimensions13 x 10 x 8 inches13.9 x 9.37 x 7.48 inches
Shipping Weight10.56 ounces1.59 pounds
Best offerCheck priceCheck price

Helmet sizes are the first factor we always recommend to consider for new buyers because the function of the helmet itself requires this gear to be properly fitted into the head. It is similar to a car’s seat belt that needs to be fitted on the passenger’s body to keep it from getting ejected and to spread impact in order to reduce concentrated side effects. A helmet must stay on the cyclist head during the activity and stay there even when hitting something.

If the helmet is too small it won’t cover the head properly or cause much discomfort while if it is too big then it may slip and not be able to do its job. To know the sizing, use a measuring tape and circle our head, about an inch above the eyebrow and shop based on the helmet measurement that falls into your sizing.

Helmet types can be confusing because some of them can be similar to each other but chances are, road riders can go well with the common helmet that is labeled for road application. They usually have the most minimum cover due to the nature of its application while for cross country many have extra visor or even heavier weight or more material to provide extra protection. For road cycling, comfort is the most important hence the helmet must be light and cooling.

On the other hand the mountain biking application calls for a sturdier and heavy duty helmet that can sustain more such as the popular Fox Proframe Vs Bell Super Air R. If the helmet is meant for racing then they will have face protection as well with chin bar to cover when the user race with gravity on difficult terrains.

About Bell Stratus and Z20

Finding the perfect helmet is probably very time consuming but, getting the correct helmet should not be so difficult and as long as they are made following the standard, fits on the head and is made for the type of discipline you are doing, the helmet will work just as good. For the amount of options however, it can be confusing as there are quite a lot of them yet if you want to save time we also recommend looking at popular brands.

Not only are they widely available, well-known names also tend to offer great quality products based on research and experiences on the field or based on the consumers’ feedback. Among those good brands, Bell is one of the best choices for those looking for good bike helmets at a very friendly price and not only how well their products are made or designed, this company also carries lots of choices to match with either your personal taste or budget range.

We can match the helmet with their purpose as well and if you are here then it means that this helmet is meant for road riding and for this application, Bell Stratus and Z20 are two amazing options you will love to have. Both of them are among the popular options for road cycling from this brand and the reason is these helmets are very comfortable. We often have to bear with a warm lid when riding on the road but not with these two.

For road helmets, comfort is the most important part for many of us and this is what both Bell Stratus and Z20 can offer to you. Price wise they are not the cheapest but they are also affordable for many of us to purchase without having to think much. These helmets are very comparable and despite the low price, they seem to be designed and made to follow their higher end models.

Bell Stratus and Z20 Design

Moving to the helmet, many people also consider the unit’s styling before they choose which seem to fit them the most. In our opinion, both of them are very stylish and very much the same to most other regular road bike helmets out there. They are sporty and carry tons of vents to make sure the air can go from the front and through your hair while being worn. In comparison, the Z20 has larger vents than Stratus but the design is similar.

The rear part of the helmet is fairly flat and you can find lots of vents here as well. Overall they are not the best-looking helmets out there but we do think they are handsome with many color options to choose from. Holding the helmet, Stratus is actually very light for helmets in this price point as it is only 317 grams in comparison to Z20 in the same size which is only 19 grams heavier.

 

Bell Stratus and Z20 Construction

Just like with any protective gear, what you may want to know first is probably the construction and this is what we want to talk about as well. They are built using the in-mold design in which the hard outer shell is fused together with the soft foam inside so instead of using glue they are made to be one unit in order to increase the durability as well as allowing the manufacturer to create a lighter helmet with more effective vents.

The outer brim of these helmets are not properly covered however so the foam may get chipped or dented when meets an impact but, it also means the helmet can be made lighter and probably feels comfortable for road use. In addition, there is MIPS integrated on the inside layer of both models to cover our head from rotational impact.

Bell Stratus and Z20 Fit

Not only the construction, we are also considering the adjustability to make sure we are able to fit these helmets properly. Starting with Stratus that is integrated with Float Retention system, this mechanism allows your helmet to not cause pressure points but also reduces bumps that may cause discomfort as you ride the bike and follow a path. The dial can be adjusted easily using a round dial while the Y-strap is adjustable as well to let you find the perfect position.

Float Fit is also used in Z20 but now it is the Float Fit Race that can be adjusted on both height and width as well as cushion cradles on the rear of the head which you may adjust for its width. Many like this system because it is probably one of the most adjustable headbands in this price range to give a full circumference wrap around the head. Additionally, it has adjustable Y-strap and adjustable chin strap for best comfort.

Bell Stratus and Z20 Comfort

The last part we want to talk about is their comfort and in this side, the fitting system of Z20 does help in making your ride as comfortable as possible. This helmet has 18 large vents that are also well-placed to help promote best airflow both in slow and higher speed so you can ride in all weather conditions. The Stratus do have sweat guide padding across the forehead, temples, and occipital area. This model also has 18 vents and seems to deliver a good performance in circulating air.

Bell Stratus Vs Z20

Both Bell Stratus and Z20 are very comparable to each other as they are equally affordable and very well-made but as different model they are also slightly different from the overall design and the weight yet, when comparing their adjustability as well as comfort, we do think Z20 is a better helmet in these categories most likely for the fitting system which is very adjustable to follow different head shapes.

- LIGHTWEIGHT INTERNAL POLYCARBONATE ROLL CAGE FUSION, & IN-MOLD POLYCARBONATE SHELL - A process pioneered by bell bonds the helmet's outer shell to the eps foam liner to create a sturdier helmet
- MIPS-EQUIPPED - MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts
- FLOAT FIT & NO-TWIST TRI-GLIDES - A minimalist, lightweight fit system with an easy-to-turn rubber over-molded dial for adjustments (integrated with MIPS). Quick-adjust fasteners that help keep straps flat and properly positioned
- SWEAT GUIDE & OVERBROW VENTILATION - Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear. Overbrow Ventilation features intake ports on the brow of the helmet to usher in cool air and push it through the air-channel matrix for full-head ventilation
- FUSION IN-MOLD POLYCARBONATE SHELL & PROGRESSIVE LAYERING CONSTRUCTION - A process pioneered by bell bonds the helmet's outer shell to the eps foam liner to create a sturdier helmet. The process of engineering a helmet liner with variable eps foam densities to better manage the transfer of energies after some impacts
- FLOAT FIT RACE (INTEGRATED WITH MIPS) & MIPS-EQUIPPED - Custom fit at the highest performance, Seemlessly integrated with MIPS and offers three-way adjustability: height, pad width and tension. MIPS stands for Multi-directional Impact Protection System, which is a leading slip-plane technology inside the helmet designed to reduce rotational forces that can result from certain impacts
- X-STATIC AND XT2 PADDING & SWEAT GUIDE - Quick-drying materials, woven with real silver fibers, inhibit growth of odor-causing bacteria and fungi. Sweat Guide pad design pulls moisture away from the brow pad and away from eyewear
- NO-TWIST TRI-GLIDES & PROGRESSIVE LAYERING - Quick-adjust fasteners that help keep straps flat and properly positioned. The process of engineering a helmet liner with variable EPS foam densities to better manage the transfer of energies after some impacts.

Conclusion

All in all you are going well with just any of them because they are amazing in this price range. In our opinion they are very comfortable but we also recommend getting the Z20 between the two as it is more comfortable and has better adjustability.

Leave a Reply

Your email address will not be published. Required fields are marked *